30L Microwave Stainless Steel Trim Kit | OTK30MX
Omega microwaves are a space and cost efficient way of cooking meals.
Stainless steel
Integrated installation
OM30X model is suitable for both under bench and in a tower installation.
OM30CX & OM30GX models are suitable for tower installation only due to ventilation requirements.
A 600mm × 100mm minimum opening is required at the rear. Refer to the specifications sheet for the install diagram.24 months parts and labour warranty
Features & Benefits
-
An integrated stainless steel trim kit.
-
Specifically suits Omega OM30X, OM30CX, and OM30GX.
-
Suitable for tower installation only due to ventilation requirements. A 600mm × 100mm minimum opening is required at the rear.
Specifications
-
376h × 592w × 20d mm
-
To fit 30 litre microwaves OM30X/OM30CX/OM30GX
-
Cabinetry ventilation:
OM30X model is suitable for both under bench and in a tower installation.
OM30CX & OM30GX models are suitable for tower installation only due to ventilation requirements. A 600mm × 100mm minimum opening is required at the rear. Refer to the specification sheet for the install diagram.Finish: Stainless steel
Capacity: To fit 30 litre microwaves OM30X/OM30CX/OM30GX
Interior Cavity Dimensions (mm): Internal width 566mm and external front height 376mm
Overall Kit Dimensions (mm): 376h × 592w × 20d (front fascia)
Parts: Fascia assembly, 4× plastic female clips, base assembly, 8× 6 gauge screws and 2× 6 gauge screws
Warranty: 24 months parts and labour
-